MOPARTS RACING

  • MOPARTS RACING Bearing Plate

    MOPARTS RACING Bearing Plate

    MOPARTS RACING BEARING PLATE The MOPARTS RACING Bearing Plate replaces your existing bearing plate that connects your rear wheel to your subframe. It is universal and fits all of the PIAGGIO / VESPA mopeds, such as CIAO / SI / BRAVO / CITTA / BOXER / GRILLO and so on. ADVANTAGES Some of the advantages of the MOPARTS RACING Bearing Plate a…
    €32.50

    €32.50

  • MOPARTS RACING Boxer Engine Centerlink

    MOPARTS RACING Boxer Engine Centerlink

      The MOPARTS RACING Boxer Engine Centerlink lets you build your own boxer-style engine, like in the video above. It is a reed valve engine. Modifications needed: You are going to have to weld two crankshafts together at 180 degree angles You will need two large Piaggio engine cases; one fits the normal way, the other needs machi…
    €145.00
  • MOPARTS RACING Ciao Fork Bushings

    MOPARTS RACING Ciao Fork Bushings

    MOPARTS RACING CIAO FORK BUSHINGS The MOPARTS RACING Ciao Fork Bushings replace your Ciao's plastic fork bushings. If you are rebuilding your Piaggio Ciao, then these are a must have! Increased overall stability Longer lifetime Fewer vibrations Material: Brass RG7 (CuSn7Zn4Pb7) This bushing set consists of four (4) bushings. …
    €12.50

    €12.50

  • MOPARTS RACING Ciao Fork Gas Springs

    MOPARTS RACING Ciao Fork Gas Springs

    MOPARTS RACING CIAO FORK GAS SPRINGS The MOPARTS RACING Ciao Fork Gas Springs are a gas spring kit that you can mount on your stock Ciao fork. If you are rebuilding your Piaggio Ciao and looking for more stability and an exclusive setup, then these full stainless steel brackets and gas springs are a must have! The brackets are made of SS304…
    €89.00
  • MOPARTS RACING Clutch

    MOPARTS RACING Clutch

    MOPARTS RACING CLUTCH We have designed and produced our very own clutch system for PIAGGIO / VESPA   CIAO / SI / CITTA WHAT IS INCLUDED AND IS IT PLUG AND PLAY? Yes! The MOPARTS RACING Clutch is a plug and play system. All of the clutch's components, such as the bearing, oil seal, circlips, bushing and starter shoes, have already been insta…
    €125.00
  • MOPARTS RACING Dremel Extension Tool

    MOPARTS RACING Dremel Extension Tool

    MOPARTS RACING DREMEL EXTENSION TOOL The MOPARTS RACING Dremel Extension Tool is a plug and play bit extension for Dremel or other handheld tuning tools. It is 70mm in length and is especially useful for tuning cylinders or ports, as the extended bit reaches further into your workpiece. Feel free to send us an e-mail at info@mopar…
    €9.50
  • MOPARTS RACING Exhaust Port

    MOPARTS RACING Exhaust Port

    MOPARTS RACING EXHAUST PORT MOPARTS RACING Exhaust Port for Malossi DEPS cylinder kits. This exhaust port has a larger outer diameter, enabling the use of exhaust pipes with a wider mouthpiece/header (such as the Simonini Calibrata, Simonini Thunder and many other exhausts). The stock outer diameter of a cylinder's exhaust port and the i…
    €9.50
  • MOPARTS RACING Front Wheel Bearings

    MOPARTS RACING Front Wheel Bearings

    MOPARTS RACING FRONT WHEEL BEARINGS Front wheel bearing conversion kits for PIAGGIO / VESPA   CIAO / BRAVO / SI / CITTA / GRILLO / etc. Advantages More stability and rigidity Less vibration Longer lifetime of bearings You can re-use your existing 11mm Piaggio / Vespa axle. No need for a new axle! These front wheel bearing c…
    €22.50
  • MOPARTS RACING Fuel Cap

    MOPARTS RACING Fuel Cap

    MOPARTS RACING FUEL CAP The MOPARTS RACING Fuel Cap is a custom designed CNC-machined fuel cap for your Piaggio Vespa Ciao, Bravo and Gilera Citta The fuel caps are available in silver or black and in six different designs. SPLINED PERFORATED OCTAGON FLAT GLOBE POLYGON The MOPARTS RACING Fuel Cap is made out of 6061…
    €24.50

    €24.50

  • MOPARTS RACING Hybrid Variomatic Shaft

    MOPARTS RACING Hybrid Variomatic Shaft

    MOPARTS RACING HYBRID VARIOMATIC SHAFT The MOPARTS RACING Hybrid Variomatic Shaft allows you to turn your mono gears into variomatic gears. The shaft has 10 teeth (gear ratio: 1:7,5) and wil enable you to use Minarelli scooter variomatic clutches on your Ciao / Bravo / Si / Citta etc. More variability Higher top speed B…
    €0.00
  • MOPARTS RACING Malossi Reed Valve Manifold

    MOPARTS RACING Malossi Reed Valve Manifold

    MOPARTS RACING MALOSSI REED VALVE MANIFOLDS The MOPARTS RACING Malossi Reed Valve Manifolds enable the use of bigger carburettors on the Malossi Reed Valve engines. The MOPARTS RACING Reed Valve Manifolds are available in two versions: SHA PHBG The SHA manifold has an outer diameter connection of 19mm. Most 16/16 carburettors ha…
    €29.50

    €29.50

More
Loading
This field is required.
This field is required.
Top