LETTER

  • MOPARTS RACING Bearing Plate

    MOPARTS RACING Bearing Plate

    MOPARTS RACING BEARING PLATE The MOPARTS RACING Bearing Plate replaces your existing bearing plate that connects your rear wheel to your subframe. It is universal and fits all of the PIAGGIO / VESPA mopeds, such as CIAO / SI / BRAVO / CITTA / BOXER / GRILLO and so on. ADVANTAGES Some of the advantages of the MOPARTS RACING Bearing Plate a…
    €32.50

    €32.50

  • MOPARTS RACING Ciao Fork Bracket Kit

    MOPARTS RACING Ciao Fork Bracket Kit

    MOPARTS RACING CIAO FORK BRACKET KIT The MOPARTS RACING Ciao Fork Bracket Kit mount on your stock Ciao fork and enable you to use a set of dampers on your Ciao for more stability. Please note that this kit does not includ a set of gas springs or dampers! To order a complete kit with gas springs or dampers, please click here The brackets are…
    €49.50 €39.50

    €49.50 €39.50

  • MOPARTS RACING Ciao Fork Bushings

    MOPARTS RACING Ciao Fork Bushings

    MOPARTS RACING CIAO FORK BUSHINGS The MOPARTS RACING Ciao Fork Bushings replace your Ciao's plastic fork bushings. If you are rebuilding your Piaggio Ciao, then these are a must have! Increased overall stability Longer lifetime Fewer vibrations Material: Brass RG7 (CuSn7Zn4Pb7) This bushing set consists of four (4) bushings. …
    €12.50

    €12.50

  • MOPARTS RACING Exhaust Port

    MOPARTS RACING Exhaust Port

    MOPARTS RACING EXHAUST PORT MOPARTS RACING Exhaust Port for Malossi DEPS cylinder kits. This exhaust port has a larger outer diameter, enabling the use of exhaust pipes with a wider mouthpiece/header (such as the Simonini Calibrata, Simonini Thunder and many other exhausts). The stock outer diameter of a cylinder's exhaust port and the intern…
    €9.50

    €9.50

  • MOPARTS RACING Front Wheel Bearings

    MOPARTS RACING Front Wheel Bearings

    MOPARTS RACING FRONT WHEEL BEARINGS Front wheel bearing conversion kits for PIAGGIO / VESPA   CIAO / BRAVO / SI / CITTA / GRILLO / etc. Advantages More stability and rigidity Less vibration Longer lifetime of bearings You can re-use your existing 11mm Piaggio / Vespa axle. No need for a new axle! These front wheel bearing c…
    €22.50
  • MOPARTS RACING Malossi Reed Valve Manifold

    MOPARTS RACING Malossi Reed Valve Manifold

    MOPARTS RACING MALOSSI REED VALVE MANIFOLDS The MOPARTS RACING Malossi Reed Valve Manifolds enable the use of bigger carburettors on the Malossi Reed Valve engines. The MOPARTS RACING Reed Valve Manifolds are available in two versions: SHA PHBG The SHA manifold has an outer diameter connection of 19mm. Most 16/16 carburettors ha…
    €29.50

    €29.50

  • MOPARTS RACING Oil Filler Nipple

    MOPARTS RACING Oil Filler Nipple

    MOPARTS RACING OIL FILLER NIPPLE The MOPARTS RACING Oil Filler Nippleis an aid tool for PIAGGIO / VESPA rear wheel transmission hubs as well as PIAGGIO / VESPA front forks. This item helps you refill your oil in your transmission or gear hub. Simply slide a 6-8mm hose over the nipple and inject oil using a syringe or a small funnel. The M…
    €9.50

    €9.50

  • MOPARTS RACING Rear Wheel Nut

    MOPARTS RACING Rear Wheel Nut

    MOPARTS RACING REAR WHEEL NUT The MOPARTS RACING REAR WHEEL NUTgoes on your outgoing transmission axle located on the right side of your moped (when looking from above). This rear wheel nut replaces your current 36mm socket size nut or flywheel. The MOPARTS RACING Rear Wheel Nut is available in lightweight aluminum or stainless steel. Al…
    €12.50

    €12.50

  • MOPARTS RACING Speed Engine Manifold

    MOPARTS RACING Speed Engine Manifold

    MOPARTS RACING SPEED ENGINE MANIFOLDS The MOPARTS RACING Speed Engine Manifolds enable the use of bigger carburettors on the Polini Speed Engine. The MOPARTS RACING Speed Engine Manifolds are available in two versions: SHA PHBG The SHA manifold has an outer diameter connection of 19mm. Most 16/16 carburettors have a 19mm inner dia…
    €27.50
  • MOPARTS RACING Variomatic Bushing

    MOPARTS RACING Variomatic Bushing

    MOPARTS RACING VARIOMATIC BUSHING   The MOPARTS RACING VARIOMATIC BUSHING replaces the old brass bushing in your variomatic's rear disc and is a must have part if you are planning on rebuilding your variomatic clutch or if you're simply switching out springs. Longer lifetime Fewer vibrations CNC-machined Material: CuSn7Zn4P…
    €9.50

    €9.50

  • Piston Pin Adaptors

    Piston Pin Adaptors

    PISTON PIN ADAPTORS The PISTON PIN ADAPTORS allow you to use a size 10mm piston pin in a piston with a 12mm connection. These adaptors easily fit into the pockets of the 12mm piston, allowing you to use your 12mm pin pistons on a 10mm pin crankshaft! Sold as a set of two. Feel free to send us an e-mail at info@mopartswebshop.com for mor…
    €5.00

    €5.00

125
Loading
This field is required.
This field is required.
Top